I found out over this past Thanksgiving weekend that I had reached the limit of my picture capacity on this blog. Rather than pay a monthly fee to be able to add more pics, I've opted to start a new blog as a continuation of this one. You can continue to follow the 41 projects here: http://41chevystreetrod.blogspot.com/ My user name is different so don't let that throw you. To all those who have followed along up to this point - Thanks for being here! To any newcomers that happen upon this blog, don't be discouraged by the abrupt end. Just head on over to the new blog and pretend you can hear Paul Harvey saying, "And now for the Rest of the Story!"
See ya there!
Tuesday, November 27, 2012
Sunday, November 18, 2012
Still taking stuff apart!
It's been a couple weeks since I last posted and I've managed to find a few hours during that time to make some progress on the disassembly of the 41. My daughter got engaged a couple weeks ago and her fiance gave me a hand removing the front end sheet metal. I had already removed the transmission, radiator and all necessary items in the engine compartment.
Once the front end was off, the engine was removed and placed in the wooden cradle in order to remove the clutch assembly and bell housing.
Next, the engine stand head was attached and the stand was slipped in place.
Engine disassembly revealed a few surprises. The valve to piston clearance was much tighter than I had expected. The intake valves have left an impression in the carbon atop the pistons!
There was evidence of some water in the oil when the valve cover was removed but it appears to be merely condensation. The rest of the oil system was clean and clear.
Here's the intake impressions I mentioned.
Unfortunately, the solid lifter retrofit on the hydraulic cam appears to have failed. Several lifter faces show extreme wear as well as a couple cam lobes. Looks like I'll be investing in a new cam and lifters. This time I'll go with a solid lifter design since quality hydraulic lifters are not available for these early six cylinder Chevies. I reread the article on machining the block for the one piece rear main seal and realized More Power can probably do the machining after all. Dick had originally said the 235 block is too long to fit in his mill but the article mentioned doing the machining with a line boring rig. Dick is now confident he can do the machining. I have the one piece seal and Speedi-Sleeve for the crankshaft seal surface repair on order. Those parts should be here before Thanksgiving. I spend a few hours at More Power last Friday sandblasting a stock valve cover and push rod/side cover to remove all the old paint and debris. The stock 57 Chevy axles for the rear end were too long for the sandblaster so I dropped them off to Dennis. He's going to blast the rust and corrosion from the axle flanges for me.
Today was spent washing the engine compartment and front suspension with hot water and soap. I'll have to put the car up on jack stands to finish the cleaning underneath prior to touching up the paint. Cathie helped me remove a bolt holding the dash support to the firewall so I could finish removing the flat panel that fits at the top of the firewall. That piece is going to get a repaint to match the dark green of the body. The stock heater is also out now along with the 2 speed switch by the radio. After studying the instructions for removing the windshield, I decided to give it a try. The rubber frame that the glass fits in was quite hard and had lost most of it's flexibility. I found it to be easier to use a box cutter knife to cut some of the rubber away until I could push the glass panels into the interior of the car and fully remove them. I was surprised that pushing the glass IN was the correct method of removal.
That's about all for now. Hope everyone has a great Thanksgiving!
Once the front end was off, the engine was removed and placed in the wooden cradle in order to remove the clutch assembly and bell housing.
Next, the engine stand head was attached and the stand was slipped in place.
Engine disassembly revealed a few surprises. The valve to piston clearance was much tighter than I had expected. The intake valves have left an impression in the carbon atop the pistons!
There was evidence of some water in the oil when the valve cover was removed but it appears to be merely condensation. The rest of the oil system was clean and clear.
Here's the intake impressions I mentioned.
Unfortunately, the solid lifter retrofit on the hydraulic cam appears to have failed. Several lifter faces show extreme wear as well as a couple cam lobes. Looks like I'll be investing in a new cam and lifters. This time I'll go with a solid lifter design since quality hydraulic lifters are not available for these early six cylinder Chevies. I reread the article on machining the block for the one piece rear main seal and realized More Power can probably do the machining after all. Dick had originally said the 235 block is too long to fit in his mill but the article mentioned doing the machining with a line boring rig. Dick is now confident he can do the machining. I have the one piece seal and Speedi-Sleeve for the crankshaft seal surface repair on order. Those parts should be here before Thanksgiving. I spend a few hours at More Power last Friday sandblasting a stock valve cover and push rod/side cover to remove all the old paint and debris. The stock 57 Chevy axles for the rear end were too long for the sandblaster so I dropped them off to Dennis. He's going to blast the rust and corrosion from the axle flanges for me.
Today was spent washing the engine compartment and front suspension with hot water and soap. I'll have to put the car up on jack stands to finish the cleaning underneath prior to touching up the paint. Cathie helped me remove a bolt holding the dash support to the firewall so I could finish removing the flat panel that fits at the top of the firewall. That piece is going to get a repaint to match the dark green of the body. The stock heater is also out now along with the 2 speed switch by the radio. After studying the instructions for removing the windshield, I decided to give it a try. The rubber frame that the glass fits in was quite hard and had lost most of it's flexibility. I found it to be easier to use a box cutter knife to cut some of the rubber away until I could push the glass panels into the interior of the car and fully remove them. I was surprised that pushing the glass IN was the correct method of removal.
That's about all for now. Hope everyone has a great Thanksgiving!
Wednesday, October 31, 2012
Let the games begin!
Taking the 41 apart has become a fall ritual but I'm hoping this is the last year I'll have to do this. This year's plans call for a paint touch up on the front end to repair all the chips, converting the rear main seal to a one piece by machining the rear of the block, adding air conditioning with heat and defrost and reinstalling the stock 5 lug axles in the rear with wheels to match the front wheels. The door panels are going to have to be removed too in order to readjust the driver's door and fix the lock mechanism. Both vent cranks don't work right and a couple of the window cranks need to be replaced. There's a few other items on the list that will become apparent later.
I had some spare time today so I got started with the disassembly. The chrome trim down the middle of the hood was removed along with the grille, headlights, parking lights, front bumper and hood. That pretty well cleared the front end and makes it ready for removal. In order to remove the hood, the first step is removing the hood springs. I failed to take pictures last year of how I was able to accomplish this without any special tools. 14 large fender washers are all that is needed to remove the springs. First, lower the hood as far as possible while still being able to get your forearm between the hood and front fender. This will stretch the spring and separate the coils. Next, insert the washers between the coils taking care to add washers to the back as well as the front of the springs. Here's a picture of the spring and washers with the hood nearly closed.
And here's a pic with the hood open after the washers are installed. I only inserted 11 washers but I was still able to work the bottom hook off the bracket.
Once the bottom hook is removed, the bolt holding the upper bracket needs to be removed and raised a bit in order to remove the upper spring hook. To remove the washers, use a floor jack to stretch the spring a bit until the washers can be easily pulled out again. Lowering the jack will restore the spring to its original shape.
Removing the front bumper makes accessing the rest of the front end parts easier. Here the floor jack is used to support the bumper so I can remove the bolts holding the bumper to the frame horns. Jacks stands are under both sides of the frame for safety. Notice the hood trim has been removed from the center of the hood. I was unaware that the hood is actually a two piece unit and bolts together in the middle.
With the bumper removed, the rest of the front end parts were easy to unbolt and remove.
That's all I was able to accomplish today. It's Halloween and my grandson's birthday. He is coming over later to trick or treat. ;)
I had some spare time today so I got started with the disassembly. The chrome trim down the middle of the hood was removed along with the grille, headlights, parking lights, front bumper and hood. That pretty well cleared the front end and makes it ready for removal. In order to remove the hood, the first step is removing the hood springs. I failed to take pictures last year of how I was able to accomplish this without any special tools. 14 large fender washers are all that is needed to remove the springs. First, lower the hood as far as possible while still being able to get your forearm between the hood and front fender. This will stretch the spring and separate the coils. Next, insert the washers between the coils taking care to add washers to the back as well as the front of the springs. Here's a picture of the spring and washers with the hood nearly closed.
And here's a pic with the hood open after the washers are installed. I only inserted 11 washers but I was still able to work the bottom hook off the bracket.
Once the bottom hook is removed, the bolt holding the upper bracket needs to be removed and raised a bit in order to remove the upper spring hook. To remove the washers, use a floor jack to stretch the spring a bit until the washers can be easily pulled out again. Lowering the jack will restore the spring to its original shape.
Removing the front bumper makes accessing the rest of the front end parts easier. Here the floor jack is used to support the bumper so I can remove the bolts holding the bumper to the frame horns. Jacks stands are under both sides of the frame for safety. Notice the hood trim has been removed from the center of the hood. I was unaware that the hood is actually a two piece unit and bolts together in the middle.
With the bumper removed, the rest of the front end parts were easy to unbolt and remove.
That's all I was able to accomplish today. It's Halloween and my grandson's birthday. He is coming over later to trick or treat. ;)
Wednesday, October 24, 2012
One last time and some mellow sounds
Sat, Oct 20 was an open house at Steve's Antique Auto Restoration. One of our club members works there so several of us showed up on a cloudy, rain threatening day to see what the place was like. Here's some pics of the cars that showed up.
Road Rodz lined up for one last time in 2012.
The Hudson above belongs to a customer of mine as well as a customer of Steve's, Glen Kellogg. Glen has quite a nice collection of Hudson's and a beautiful garage/shop where he stores them.
The rains came just after I left Steve's to visit my friend Dennis, the guy who sold me the 41. All the other club cars got wet too. Today was wash the dirt off from that Saturday shower before I begin taking the 41 apart for the winter projects. Rubbing dirt into the paint while leaning on the car is a good way to ruin the paint so it needed to be cleaned. I've been wanting to record the sound of the dual exhaust system on the 41 so before the wash, I set up my camera on a stand behind the car and shot a short video with sound so others can appreciate the mellow tones of a nice sounding cam in an old Chevy 6 cylinder. Here's a link to the video on Youtube. http://www.youtube.com/watch?v=0Pp-uwOqh3E&feature=youtu.be&noredirect=1
Road Rodz lined up for one last time in 2012.
The Hudson above belongs to a customer of mine as well as a customer of Steve's, Glen Kellogg. Glen has quite a nice collection of Hudson's and a beautiful garage/shop where he stores them.
The rains came just after I left Steve's to visit my friend Dennis, the guy who sold me the 41. All the other club cars got wet too. Today was wash the dirt off from that Saturday shower before I begin taking the 41 apart for the winter projects. Rubbing dirt into the paint while leaning on the car is a good way to ruin the paint so it needed to be cleaned. I've been wanting to record the sound of the dual exhaust system on the 41 so before the wash, I set up my camera on a stand behind the car and shot a short video with sound so others can appreciate the mellow tones of a nice sounding cam in an old Chevy 6 cylinder. Here's a link to the video on Youtube. http://www.youtube.com/watch?v=0Pp-uwOqh3E&feature=youtu.be&noredirect=1
Sunday, October 14, 2012
Limo Service
Yesterday was Sat, Oct 13, 2012. That date is nothing special in my family but it will always be a special day for a young couple who were married yesterday. Emily and Matt tied the knot at a Methodist Church in Alto, Mi, on a rainy Sat afternoon. I'd like to think my wife, Cathie, and I had a small part in helping to make their day something special.
Earlier in the week I received a phone call from a fellow car friend who is the president of the Grand Rapids Street Racers Association. Dan informed me that he had received a message on his phone from a guy looking for someone with a 40's era car that was willing to do a photo shoot on Saturday, Oct 13. The guy left his first name and phone number and that's all that Dan knew. The 41 was still all together so I figured I'd give the guy a call and see what this was all about. The fella's name was Bob and when we talked, he informed me his daughter, Emily, was getting married on Saturday and she and her fiance, Matt, were big into 40's era style and had chosen to do a 40's themed wedding and reception. Bob wanted to surprise them by providing a 40's era car to drive them from the church to a nearby pub and be available for some pictures. Emily and Matt are both from the Lowell and Alto area but met in Los Angeles. They both work in Hollywood in the music/movie industry. Bob and I discussed compensation for my gas but he insisted on paying much more for my time. I asked if it would be ok if my wife came along and he approved without hesitation.
Cathie was quite excited when I told her we had a "Limo Gig" lined up for Saturday afternoon and we would both be dressing up in 40's style duds. What the heck! We wanted to fit in too! A car show was scheduled on Saturday morning so we planned to attend the show until 2, grab some lunch, change clothes and head to the wedding. Bob had asked us to arrive around 4:15 because the ceremony was scheduled for 4:00 and he didn't want Emily and Matt to see the car until after folks had been through the receiving line. I shared our plan with several Road Rodz club members but we all were concerned about the weather forecast for Sat. All the local tv stations and weather.com were calling for day long rain. Club member Ken takes most of the pictures for our club as well as maintaining the club blog and Facebook page. He was quite excited when I told him of the Limo Gig and said he would try to make it to the church and take some pics for the club pages.
The weather forecasters were right on the money with their rainy prediction and the morning car show was a rain out. I was a bit concerned about driving in heavy rain since I knew the windshield had leaked last year when we had been caught in a heavy shower. I took a couple large towels to put on the floor in the back seat to protect the carpet from muddy feet and grabbed a couple hand towels just in case the water started coming in around the windshield again. Good thing we brought the had towels because Cathie and I stayed busy during the drive to the church soaking up water that came in the corners and center area of the windshield and ran down the dashboard.
We arrived at the church right on schedule while everyone was inside. As soon as the ceremony was completed, a couple of young men came out with a Just Married sign and several tin cans tied together with fly fishing line. I gave them a little help in affixing the sign and cans to the back of the 41.
Emily's maternal grandfather came outside just prior to the bride and groom making their exit. He informed Cathie and I that his first car was a 1941 Chevy 2 door sedan just like ours. He was smiling ear to ear as he checked out the 41. That's him on the far left of the next picture. This is Emily and Matt just as they came through the door and saw the car waiting for them.
Despite the rain, the happy couple was all smiles.
I managed to grab another pic from behind the car as Emily and Matt sneaked in another kiss!
Kenny made it to grab the club pics and added these to Facebook.
Ken also got a nice shot of Cathie and I in our best attempt at 40's clothing.
Cathie came up with an idea that capped off the 40's era atmosphere. Once the 41 was running, I turned on the radio with the usb drive connected. The first song up was Glenn Miller's band playing "In the Mood". Emily and Matt loved it!
Bob invited Cathie and I to join the the wedding party for a quick beer at the Alto Bar before they all headed off to the wedding reception on the party bus. The rain quit while we were in the bar making the trip home less of a water catching contest than the ride there. We followed the party bus to the expressway and honked the ooga horn as we buzzed by at 75 mph! What a great event and we both felt privileged to have added a small part to the theme of their special day.
The 41 is back in the garage ready for the winter changes to begin. The new speedometer/odometer that was installed last winter now shows 2965 miles. The car spent quite a bit of time on the road this year and other than the rear main seal leak, it has been trouble free all year. The new windshield glass panels and rubber frame have been sitting in the garage all summer but Saturday's rain experience just confirmed the importance of giving a high priority to getting those parts installed. I should add, the heater/defroster worked flawlessly yesterday keeping both of us quite warm and the windshield clear of fog.
Earlier in the week I received a phone call from a fellow car friend who is the president of the Grand Rapids Street Racers Association. Dan informed me that he had received a message on his phone from a guy looking for someone with a 40's era car that was willing to do a photo shoot on Saturday, Oct 13. The guy left his first name and phone number and that's all that Dan knew. The 41 was still all together so I figured I'd give the guy a call and see what this was all about. The fella's name was Bob and when we talked, he informed me his daughter, Emily, was getting married on Saturday and she and her fiance, Matt, were big into 40's era style and had chosen to do a 40's themed wedding and reception. Bob wanted to surprise them by providing a 40's era car to drive them from the church to a nearby pub and be available for some pictures. Emily and Matt are both from the Lowell and Alto area but met in Los Angeles. They both work in Hollywood in the music/movie industry. Bob and I discussed compensation for my gas but he insisted on paying much more for my time. I asked if it would be ok if my wife came along and he approved without hesitation.
Cathie was quite excited when I told her we had a "Limo Gig" lined up for Saturday afternoon and we would both be dressing up in 40's style duds. What the heck! We wanted to fit in too! A car show was scheduled on Saturday morning so we planned to attend the show until 2, grab some lunch, change clothes and head to the wedding. Bob had asked us to arrive around 4:15 because the ceremony was scheduled for 4:00 and he didn't want Emily and Matt to see the car until after folks had been through the receiving line. I shared our plan with several Road Rodz club members but we all were concerned about the weather forecast for Sat. All the local tv stations and weather.com were calling for day long rain. Club member Ken takes most of the pictures for our club as well as maintaining the club blog and Facebook page. He was quite excited when I told him of the Limo Gig and said he would try to make it to the church and take some pics for the club pages.
The weather forecasters were right on the money with their rainy prediction and the morning car show was a rain out. I was a bit concerned about driving in heavy rain since I knew the windshield had leaked last year when we had been caught in a heavy shower. I took a couple large towels to put on the floor in the back seat to protect the carpet from muddy feet and grabbed a couple hand towels just in case the water started coming in around the windshield again. Good thing we brought the had towels because Cathie and I stayed busy during the drive to the church soaking up water that came in the corners and center area of the windshield and ran down the dashboard.
We arrived at the church right on schedule while everyone was inside. As soon as the ceremony was completed, a couple of young men came out with a Just Married sign and several tin cans tied together with fly fishing line. I gave them a little help in affixing the sign and cans to the back of the 41.
Emily's maternal grandfather came outside just prior to the bride and groom making their exit. He informed Cathie and I that his first car was a 1941 Chevy 2 door sedan just like ours. He was smiling ear to ear as he checked out the 41. That's him on the far left of the next picture. This is Emily and Matt just as they came through the door and saw the car waiting for them.
Despite the rain, the happy couple was all smiles.
I managed to grab another pic from behind the car as Emily and Matt sneaked in another kiss!
Kenny made it to grab the club pics and added these to Facebook.
Ken also got a nice shot of Cathie and I in our best attempt at 40's clothing.
Cathie came up with an idea that capped off the 40's era atmosphere. Once the 41 was running, I turned on the radio with the usb drive connected. The first song up was Glenn Miller's band playing "In the Mood". Emily and Matt loved it!
Bob invited Cathie and I to join the the wedding party for a quick beer at the Alto Bar before they all headed off to the wedding reception on the party bus. The rain quit while we were in the bar making the trip home less of a water catching contest than the ride there. We followed the party bus to the expressway and honked the ooga horn as we buzzed by at 75 mph! What a great event and we both felt privileged to have added a small part to the theme of their special day.
The 41 is back in the garage ready for the winter changes to begin. The new speedometer/odometer that was installed last winter now shows 2965 miles. The car spent quite a bit of time on the road this year and other than the rear main seal leak, it has been trouble free all year. The new windshield glass panels and rubber frame have been sitting in the garage all summer but Saturday's rain experience just confirmed the importance of giving a high priority to getting those parts installed. I should add, the heater/defroster worked flawlessly yesterday keeping both of us quite warm and the windshield clear of fog.
Friday, September 21, 2012
End of summer update
I see it's been quite a while since I updated any info on the blog. The late summer shows were somewhat repetitive with the exception of two large events - the 28th Street Metro Cruise and the NSRA Nationals North. The Road Rodz car club has reserved spots in the Rogers Plaza lot for Metro Cruise for many years. That is the heart of the action on Friday night and all day Saturday. An additional venue was added this year on Thursday evening to extend the weekend activities. Pal's Diner on the east end of 28th Street hosted a Cruise In with a live band as well as a DJ, good food and a guest appearance by Paul LeMat who played John Milner in the movie American Graffitti. 200+ cars filled the parking lot at Pal's and overflowed into the surrounding businesses.
At one point, we had 16 Road Rodz cars in the lot at Pal's. Friday and Saturday of Metro Cruise were exciting watching all the cars driving along 28th street as well as viewing all the cars parked in Rogers Plaza. The Road Rodz occupied 15 reserved spots with an additional 4 cars parking nearby in the open parking area. There are no awards or recognition at this event; just a weekend for car lovers to gather to share their common interest.
On Friday afternoon, before the Metro Cruise activities, I attended a reunion of old street racers and drag racers who used to hang out at Big Boy's restaurant in downtown Grand Rapids. Bob Garvey hosted this annual event and it was great fun seeing some of the guys from the "old days" of cruising the circuit in GR.
On Aug 18th another reunion took place that came together in a strange way. Some of us were chatting on the Martin US131 Dragway Facebook page and I suggested Aug 18th as an open date in the car show action. Once I asked who would be "up for a racer's reunion", the idea caught fire and we all got on the phones to contact former competitors and track workers from the 60's, 70's and 80's. Gary Hunt was a racer of that era who now works as the track announcer at 131 and he put me in touch with track management and helped coordinate the entire day's activities. The idea was originally put out on July 31 and in 17 days we pulled together over 115 former racers and 30+ cars. the cars were a mix of former race cars, current race cars, as well as hot rods and restored vehicles. Everyone had a great time reminiscing about the "old days" and spending the day with old friends. Here's a picture of four of us who raced against each other back in the 70's. We all had 1969 Z28 Camaros back then and all ran in F/S class. From left to right: Dan Bowers, me, John Lambregtse, and Jim Zaskowski.
The track management was so impressed with the event that they have expressed a desire to make this an annual event. Plans are for me to meet with them during the late fall or early winter to provide some input as to how best to offer a reunion show next year.
The weekend of Sep 14-16 was this years 33rd annual NSRA Nationals North in Kalamazoo, Mi. The Kalamazoo Fairgrounds is about a 60 mile drive so the 41 added over 360 miles to the odometer to close out the year.
I had been a bit apprehensive prior to Labor Day when I thought I was hearing an increase in valve/rocker arm noise coming from the 235. I began to worry about the solid lifters on the hydraulic camshaft and that possibly one or more of the camshaft lobes may be wearing causing an increase in valve clearance. I had cancelled a road trip to a show up north on Labor Day weekend to prevent promoting cam failure but it proved to be my imagination! Once I pulled the valve cover and rechecked the clearances, all 12 rocker arms were lashed within .006-.008".
The 41 performed flawlessly for the entire Nats North weekend. This was my first time attending this event and I was amazed by the number of high quality cars on display. Over 2400 pre 1982 vehicles packed the parking areas on Fri and Sat. About 2/3 of that number made it back for Sunday's awards presentations. My gas mileage for the weekend averaged out to 19.4 mpg or about $25 per day; cheaper than a hotel room! The NSRA offers a safety inspection of all cars attending the event with 23 points being the desired approval rating. I knew the 41 would fail one item since I have not installed a parking brake yet. Regardless, I had the inspection done and passed the other 22 points. The 41 now has a 16 point inspection sticker on the windshield. (They only issue 16 or 23 stickers). The leaking rear main seal was the only annoying issue of the entire weekend.
Both the Metro Cruise and the Nats North offered picture taking opportunities by the score. I probably have over 100 photos from each event! With that many pics, it's hard to chose which to post here so I'll just leave that for another time.
I contacted Jerry Hallberg on Monday to review getting the chips in the front end paint fixed during the "off season". He's has the 41 on his schedule and suggested I pay a visit to Sherwin Williams paint store with the 41 so they can check the colors with their computer. This will allow a good match to the existing paint. I paid them a visit yesterday.
The wife and I are off on a short vacation the end of next week. When we return, I'll begin tearing down the 41 for this year's improvements. Plans call for fixing the leaking rear main seal, replacing the windshield, disassembling both doors to fix the vent mechanisms and driver's lock, installing a new ac/heater/defrost system, fixing the chips in the paint, replacing the rear wheels and axles, and adding a little more "bling" to the engine with some customizing of the valve cover and side cover.
Sorry for the long delay between updates but, as they say, "Life got in the way!"
At one point, we had 16 Road Rodz cars in the lot at Pal's. Friday and Saturday of Metro Cruise were exciting watching all the cars driving along 28th street as well as viewing all the cars parked in Rogers Plaza. The Road Rodz occupied 15 reserved spots with an additional 4 cars parking nearby in the open parking area. There are no awards or recognition at this event; just a weekend for car lovers to gather to share their common interest.
On Friday afternoon, before the Metro Cruise activities, I attended a reunion of old street racers and drag racers who used to hang out at Big Boy's restaurant in downtown Grand Rapids. Bob Garvey hosted this annual event and it was great fun seeing some of the guys from the "old days" of cruising the circuit in GR.
On Aug 18th another reunion took place that came together in a strange way. Some of us were chatting on the Martin US131 Dragway Facebook page and I suggested Aug 18th as an open date in the car show action. Once I asked who would be "up for a racer's reunion", the idea caught fire and we all got on the phones to contact former competitors and track workers from the 60's, 70's and 80's. Gary Hunt was a racer of that era who now works as the track announcer at 131 and he put me in touch with track management and helped coordinate the entire day's activities. The idea was originally put out on July 31 and in 17 days we pulled together over 115 former racers and 30+ cars. the cars were a mix of former race cars, current race cars, as well as hot rods and restored vehicles. Everyone had a great time reminiscing about the "old days" and spending the day with old friends. Here's a picture of four of us who raced against each other back in the 70's. We all had 1969 Z28 Camaros back then and all ran in F/S class. From left to right: Dan Bowers, me, John Lambregtse, and Jim Zaskowski.
The track management was so impressed with the event that they have expressed a desire to make this an annual event. Plans are for me to meet with them during the late fall or early winter to provide some input as to how best to offer a reunion show next year.
The weekend of Sep 14-16 was this years 33rd annual NSRA Nationals North in Kalamazoo, Mi. The Kalamazoo Fairgrounds is about a 60 mile drive so the 41 added over 360 miles to the odometer to close out the year.
I had been a bit apprehensive prior to Labor Day when I thought I was hearing an increase in valve/rocker arm noise coming from the 235. I began to worry about the solid lifters on the hydraulic camshaft and that possibly one or more of the camshaft lobes may be wearing causing an increase in valve clearance. I had cancelled a road trip to a show up north on Labor Day weekend to prevent promoting cam failure but it proved to be my imagination! Once I pulled the valve cover and rechecked the clearances, all 12 rocker arms were lashed within .006-.008".
The 41 performed flawlessly for the entire Nats North weekend. This was my first time attending this event and I was amazed by the number of high quality cars on display. Over 2400 pre 1982 vehicles packed the parking areas on Fri and Sat. About 2/3 of that number made it back for Sunday's awards presentations. My gas mileage for the weekend averaged out to 19.4 mpg or about $25 per day; cheaper than a hotel room! The NSRA offers a safety inspection of all cars attending the event with 23 points being the desired approval rating. I knew the 41 would fail one item since I have not installed a parking brake yet. Regardless, I had the inspection done and passed the other 22 points. The 41 now has a 16 point inspection sticker on the windshield. (They only issue 16 or 23 stickers). The leaking rear main seal was the only annoying issue of the entire weekend.
Both the Metro Cruise and the Nats North offered picture taking opportunities by the score. I probably have over 100 photos from each event! With that many pics, it's hard to chose which to post here so I'll just leave that for another time.
I contacted Jerry Hallberg on Monday to review getting the chips in the front end paint fixed during the "off season". He's has the 41 on his schedule and suggested I pay a visit to Sherwin Williams paint store with the 41 so they can check the colors with their computer. This will allow a good match to the existing paint. I paid them a visit yesterday.
The wife and I are off on a short vacation the end of next week. When we return, I'll begin tearing down the 41 for this year's improvements. Plans call for fixing the leaking rear main seal, replacing the windshield, disassembling both doors to fix the vent mechanisms and driver's lock, installing a new ac/heater/defrost system, fixing the chips in the paint, replacing the rear wheels and axles, and adding a little more "bling" to the engine with some customizing of the valve cover and side cover.
Sorry for the long delay between updates but, as they say, "Life got in the way!"
Monday, August 6, 2012
Somebody was smiling
My wife went with me yesterday to a car show at Klackle's Orchards in Greenville, Mi. As we were riding along, I told her how much I enjoyed driving the 41 and how much better it handles and stops than it did last year. She agreed and said, "Somewhere up above, the old guy that owned this car is looking down and smiling because this car is being driven by someone that enjoys it." "Yes," I added, "and other people get to see it too!"
So, we get to the show and while we were sitting in the shade of our canopy, chatting with friends, Cathie went to the car to retrieve something from the glove box. She was sitting in the passenger seat with the door propped open when two guys and a young boy walked up to the car. One of the guys said to Cathie, "Did you buy this car from a guy on Leonard Street?" "Yes, we did," she said. Whereupon the guy said, "From Dennis K?" "Yes, from Dennis," she responded. "My father-in-law used to own this car!", was his response. Cathie then called me to the car and I had a great chat with Tom and his brother Larry about how the transaction came about and how we ended up with the 41. Tom then informed me that his wife, the daughter of the former owner, was coming to the show later in the day. Tom & Larry both had cars entered in the show and she was coming to join them.
Tom also confirmed my suspicions on the origins of my 41. His father-in-law, Barry Tate, had bought the car in 1990 from the then manager of the Mr. Steak/Shelde's Restaurants in Grand Rapids. That fella had purchased the car from a restored car dealer in Hudsonville, Mi in 1988 and drove it for a couple years. The dealer had acquired the car through an auction in Missouri in 1988. I believe the auction was in Branson, Mo. Tom confirmed that Barry had always said this was a Missouri car.
When Tom's wife Bonnie arrived, we had a chance to learn more about the car and she sat in the driver's seat for a bit. Both Bonnie and Tom agreed that Barry, her dad, would not have liked the improvements I have made because he was a "purist". Barry liked his cars all original. But they both added that they really liked the changes and thought the car looked great. I took a picture of Bonnie and Tom in front of the 41.
Bonnie used some of her inheritance money to buy Tom a car just like he had owned previously but had to sell in order to buy a house. She surprised him for his 50th birthday with a 1969 Camaro SS. That's the car Tom had at the show and he won a Top 60 award.
The 41 garnered enough votes for a Top 60 as did the other Road Rodz in attendance.
Was it coincidence that Cathie and I had earlier talked about the previous owner looking down and then his daughter shows up? Maybe ol' Barry Tate was looking down and smiling after all. He may have preferred to keep his cars in original condition but I think he let us know he approved of what we have accomplished with the 41. Keep watching over us, Barry. ;)
So, we get to the show and while we were sitting in the shade of our canopy, chatting with friends, Cathie went to the car to retrieve something from the glove box. She was sitting in the passenger seat with the door propped open when two guys and a young boy walked up to the car. One of the guys said to Cathie, "Did you buy this car from a guy on Leonard Street?" "Yes, we did," she said. Whereupon the guy said, "From Dennis K?" "Yes, from Dennis," she responded. "My father-in-law used to own this car!", was his response. Cathie then called me to the car and I had a great chat with Tom and his brother Larry about how the transaction came about and how we ended up with the 41. Tom then informed me that his wife, the daughter of the former owner, was coming to the show later in the day. Tom & Larry both had cars entered in the show and she was coming to join them.
Tom also confirmed my suspicions on the origins of my 41. His father-in-law, Barry Tate, had bought the car in 1990 from the then manager of the Mr. Steak/Shelde's Restaurants in Grand Rapids. That fella had purchased the car from a restored car dealer in Hudsonville, Mi in 1988 and drove it for a couple years. The dealer had acquired the car through an auction in Missouri in 1988. I believe the auction was in Branson, Mo. Tom confirmed that Barry had always said this was a Missouri car.
Bonnie used some of her inheritance money to buy Tom a car just like he had owned previously but had to sell in order to buy a house. She surprised him for his 50th birthday with a 1969 Camaro SS. That's the car Tom had at the show and he won a Top 60 award.
The 41 garnered enough votes for a Top 60 as did the other Road Rodz in attendance.
Was it coincidence that Cathie and I had earlier talked about the previous owner looking down and then his daughter shows up? Maybe ol' Barry Tate was looking down and smiling after all. He may have preferred to keep his cars in original condition but I think he let us know he approved of what we have accomplished with the 41. Keep watching over us, Barry. ;)
Subscribe to:
Posts (Atom)