Mar 22

Spent the morning picking up the water temp fitting I ordered from Napa, various nuts & bolts from Tractor Supply and paint & masking tape from Home Depot.  Had to drill the hole a little bigger in the fitting but that was no big deal.  Got the engine compartment wiped down and primered.

Here's a before shot.

Also put some paint on the starter, generator, bell housing, flywheel shield and battery box.

The garage is getting a little more crowded with new parts coming in and old parts being set aside for reuse or storage.

The weather isn't cooperating this week at all.  Looks like it'll be rain/snow/ice mix for the next few days with temps 10 degrees below normal.  Forecast is for high's in the 30's!!  Looks like the heater continues to get a workout keeping the shop area warm.  Garage stays at 55 - 60 without any trouble.